CNC
plasma cutting machine uses environmental control:
Cnc Plasma cutting machine uses environmental control:
Use NC
Plasma cutting machine as it relates to aspects of electricity, gas and other energy sources, together with the dust material cutting process is formed, the control of the environment have certain requirements, the domestic processing plants and use environments, NC The environmental control of plasma cutting machine has a big gap in both consciousness and hardware facilities. Our company has served many machining companies for many years, and the yc series
Cnc Cutting Machine produced by the company is recognized by the majority of users. Here we will Put forward some opinions and suggestions on the environmental control problem of the
CNC Plasma cutting machine.
Plasma cutting machine will produce noise, smoke, arc and metal vapor during the cutting process, which will cause environmental pollution, especially when cutting or cutting non-ferrous metals at high current. Several different equipments and techniques are available to reduce this level of contamination. In addition to water recompression plasma arc cutting, water surface cutting and subsurface cutting are also effective methods to suppress environmental pollution.
It is necessary to have a water storage tank for cutting on the water surface, and the work table for placing the workpiece in the water storage tank is composed of a plurality of arranged pointed steel members, and the pointed steel members support the cut workpiece on a horizontal surface. When the torch is working, the plasma arc is surrounded by a layer of water curtain. In order to maintain a continuous water curtain, a circulating water pump is required to pump water out of the water reservoir before entering the torch. Water discharged from the torch when it is formed enveloped curtain surrounding the plasma arc. This greatly curtain control hazards pollutants generated during the cutting noise, smoke, arc and metal vapor to the environment. This method requires a water flow rate of 55 ~ 75L / min.
Underwater is cut underwater workpiece placed around 75mm. The table on which the workpiece is placed consists of a pointed steel member. The purpose of selecting a pointed steel member is to provide the cutting table with sufficient capacity to accommodate chips and slag.
When the torch is launched, the water around the nozzle end face of the torch is first discharged with a stable compressed air flow, and then the plasma arc is ignited for cutting. When cutting under the water surface, keep the depth of the workpiece submerged under the water surface. A system for controlling the water level should be prepared, and then a water pump and a water storage tank should be added to maintain the water level by means of water injection and drainage.
Generally, a manual plasma cutting machine cutting or automatic cutting work station should be equipped with an exhaust system to extract the exhaust gas from the work shop. However, the exhaust gas still pollutes the environment. If the pollution caused exceeds the national allowable standard, the smoke and dust transition equipment should be added.
More about Hongming welding, Hongming welding and cutting equipment, Hongming CNC equipment,
CNC Cutting Machine, CNC plasma cutting machine, portable CNC cutting machine, small bee CNC cutting machine, CNC cutting machine maintenance, CNC cutting machine transformation, CNC We can call our company for problems such as cutting machine upgrade, we will be happy to help you, you can call and you can also visit Shanghai Welding and Cutting Equipment Co., Ltd. official website:; For enquiry and understanding, we look forward to your call and consultation, your Satisfaction is the purpose of our service! !
September 11, 2020
