CNC plasma cutting machine to buy two major points

The CNC plasma cutting machine currently on the market is the most ideal cutting method for cutting non-ferrous metals with thickness less than 1 inch. In terms of cutting, Plasma cutting is not only faster but also more easily non-linear cutting. When cutting aluminum, copper, stainless steel and other metal materials, it is the strength of plasma cutting. How do you decide to purchase a Cnc Plasma cutting machine, Wuhan Haoba warm reminder, pay attention to the following two aspects:
Note 1: Determining the Thickness of Commonly Used Cutting Metals Most plasma cutting machine power sources are determined by the cutting power and the size of the current. If we often cut thin metal plates, then we should consider a low-current CNC Plasma cutting machine. In addition, although a small machine can cut a certain thickness of metal, the cutting quality may not be guaranteed. Each machine will have the best range of cutting thickness, so we have to make sure that the setting is in line with our requirements. In general, CNC plasma cutting machine selection must be X60% based on the limit cutting thickness, which is the normal cutting thickness of the cutting equipment.
Note 2: Select the load continuation rate of the device. If you want to perform long cuts or automatically set cuts, make sure to check the machine's duty cycle. The duty cycle of the load is simply the duration of the operation of the equipment until it is overheated and requires cooling. The workload continuation rate is usually determined by percentage as a standard for 10 minutes. An analogy: 100A of current, 60% of the workload's continuous rate means that you can continue cutting for 6 minutes under the current of 100A. The higher the workload cycle, the longer you can continue cutting.