CNC cutting machine maintenance of CNC plasma cutting machine

[New weather after year, cutting machine through the bottom price. The lowest price of the whole network, all kinds of customized cutting machine will be 50% discount wholesale order price, a small one-dimensional drawings to achieve a three-dimensional 3D cutting machine parts, where to set where, customers no longer have to worry about no supply and reserve price . What are you waiting for? The reserve price is known to you.Cutting Machine
China Industrial Network Cnc Cutting Machine's work site and working environment is relatively poor, metal dust is relatively large. Therefore, the machine must be thoroughly cleaned and maintained. The person responsible should be responsible for the lubrication, repair and maintenance of the equipment!

First, safe operation:
1. The CNC Cutting Machine is a kind of precise equipment, so the operation of the cutting machine must be done in three stages (definite, fixed, fixed).
2. The operator must be professionally trained and skilled, and non-professionals should not move.
3. Before operation, it must be confirmed that there is no outside interference. After everything is normal, the cut plate is hung on the cutting platform, and the plate can't exceed the cutting range (Note: Be careful when lifting).
Second, daily maintenance and maintenance:
1. The dirt on the machine tool and the guide rails must be cleaned every working day to keep the bed clean. The air source and power supply should be turned off at work, and the remaining air in the machine belt should be drained.
2. If you leave the machine for a long time, turn off the power to prevent non-professional operation.
3. Pay attention to observing the horizontal and vertical rails of the machine and whether the surface of the rack is lubricated to keep it lubricated!
Third, weekly maintenance and maintenance:
1. Clean the machine thoroughly every week, clean the horizontal and vertical guide rails, drive gear racks, and add lubricant.
2. Check if the horizontal and vertical wiper is working properly. If not, replace it in time.
3. Check that all torches are loose, clean the litter from the ignition gun, and keep the ignition normal.
4. If there is an automatic height-adjustment device, check whether it is sensitive and whether to replace the probe.
5. Check if the Plasma torch and electrode are damaged, and if the nozzle and electrode need to be replaced.
[I can't think of it. I can't do it. Change your style from now on. Opening the Chinese cutting machine trading network is equivalent to opening up your wealth road, come and click on the website now! Reference: Cutter Editor: kswkfhl