http://www.cncfiberlaser.com
Home > Products > Laser Machine > Laser Parts > W6 CO₂ Glass Tube

W6 CO₂ Glass Tube

    Payment Type: T/T,Western Union
    Incoterm: FOB,CFR,CIF
    Min. Order: 1 Piece/Pieces
    Delivery Time: 5 Days
Basic Info

Model No.: w6

Brand Model: W4 Laser Tube

Country Of Origin: Beijing China

Quality Standard: 100w-130w

Additional Info

Packaging: wooden package

Productivity: 1000

Brand: Reci

Transportation: Ocean,Land,Air

Place of Origin: Beijing China

Supply Ability: 1000/month

Certificate: CE, ISO, SGS

HS Code: 8456110090

Port: Qingdao Port

Product Description

W6 Operation Instruction

laser tube can be for CO2 laser engraving machine, Laser Cutter, Laser Engraver, and fiber laser cutting machine. It is power for laser machines ,laser tube is important Laser Parts for machine. please check suitable model of laser tube or contact our workers

1. Installation Requirement

Make sure to follow the operation instruction of model W6 as shown in the illustration. The dedicated power P14 should be equipped. The positive pole of laser tube is in high voltage (the ignition voltage is 28kv). It may cause the following consequence when it is failed to follow the instruction: Arcing; the inner tube will be punctured by electricity and may cause water leakage.

2. Operation conditions

Water cooling: using purified water; 3 to 5 liter/minute; water temperature: 10-40.

The operating environment: temperature 2-40; humidity 10-60%.

The working current: test current is 32mA. Maximum working current is 32mA. The running current must be kept below 30mA. The life span can reach 10,000 hours if the current is kept below 30mA. The ammeter must be connected to the negative electrode of laser tube.

When it is working under over-high current for long term, the negative pole will appear brown yellow, and the life span will be shortened rapidly.

To protect dust from going into the insulation sheath, please wrap it with plastic film.

3. Working Performance

Cutting function.

Engraving function: Very good. When the working current is 4mA and the tube is in the state of preionization, the laser can be used for high-frequency impulse engraving.

4. Key Notes

Do not clean the exterior surface of the output widow mirror with tools such as tampon; otherwise the output power will be seriously affected. The followings are the designated methods to clean up pollution in the exterior surface of window mirror:

1) When the mirror is polluted, do not turn on the laser.

2) Blow the mirror surface sideways with an air blower.

3) Spray the pure alcohol on the mirror surface with sprayer.

4) Turn on the laser after the alcohol gets fully volatilized.

5) If the methods above don't work effectively, it is necessary to ask for the professional to use tampon with alcohol to clean the mirror surface from middle to edge. The best solution is to prevent the window from being polluted.

Attention: it is forbidden to clean the mirror with acetone.

The screws in the front and back ends of the laser tube are not allowed to be moved, otherwise the out power will be declined, even the tube will be scrapped.

Put the acryl 300mm far away from output mirror, when testing its laser spot.

5. Safety

The laser beam is invisible light. Please wear protective glasses when debugging the laser. The positive pole is in high voltage. Pay attention to the security marks.

6. Storage and Transportation Requirement

Pour out cooling fluid in the event of storage and transportation, and cover the output terminal with a dust-proof plastic bag. The storage environment is 2-40, and the requested humidity is 10-60%. Pack the laser as in the original way.

Important notes: it is requested to use adhesive tape to cement the sponge together with laser tube to prevent the tube from vertically sliding during transportation. The sponge in the side of output mirror must be 70 mm beyond it, and the sponge in the side of reflecting mirror must be 50 mm wider.

Tubes operated in wrong way are not guaranteed by Manufacturer.

Looking for ideal CO2 Glass Tube Manufacturer & supplier ? We have a wide selection at great prices to help you get creative. All the Laser Co2 Tube are quality guaranteed. We are China Origin Factory of Laser Tube Co2. If you have any question, please feel free to contact us.

Product Categories : Laser Machine > Laser Parts

Email to this supplier
  • *Subject:
  • *Messages:
    Your message must be between 20-8000 characters
Communicate with Supplier?Supplier
Sophia Liu Ms. Sophia Liu
What can I do for you?
Chat Now Contact Supplier